WLP website updates 9-2021

NOTES: After reviewing products on your site we have the following suggestions for WLP web presence for Triad-Orbit.

EACH section below has notes for each product, which includes extra use case pictures, URL’s for product video. Currently, each product has the same video, the CG system video. We are glad you have that there, because it is the best video at showing the diversity of the system. IF, however, you can add a second video, we have added URL’s for the idividual product video links. Product descriptions are included as well, as we did not see any descriptions of the products on the site.

PLEASE CALL ME IF YOU HAVE ANY QUESTIONS

Steve Danielson

360-265-9677

___________________________________________________________________________________________________________________________

M1 and M1-R are discontinued. Replaced by M3 and M3-R

Triad-Orbit M3-R Retrofittable Long Stem Adaptor

____________________________________________________________________________________________________

T3c

Triad-Orbit T3C Tall Tripod Stand with casters


Main photo

Needs usage photos.
 
Product Description for website:

Triad Series T3C is combination of a special, caster-ready, large 3-section tripod stand stand and set of TC dual-locking, industrial-grade locking casters. The casters are easy to install and remove for versatile utility.

It has a wheel diameter of 3″ and a maximum footprint of 24″. With the legs in the most stable position, the maximum height is 75.5″ and the minimum height is 36.75″. The weight of the stand (including wheels) is 18.25 pounds.

____________________________________________________________________________________________________
OA-M
https://vintageking.com/triad-orbit-oa-m-orbit-arm-mini
Main photo
Needs Usage photos
Product description for website:

OA-M,Orbit Arm Mini™ works in the same diverse applications as the larger OA Orbital Arm, where robust strength and hold is needed in a smaller size, allowing it to fit into tighter spaces. Pair with IO-C, IO-GC, IO-GCM Clamps or IO-W wall plate for a full-functioning boom arm that attaches to stands, IO-RL, desktops, walls, etc. OA-M is IQ-Equipped, allowing the convenience of populating IO-H heads in your lights, cameras or flags.

Pair with a IO‑C Clamp or IO‑W Wall plate for a full-functioning boom arm that attaches to stands, consoles, desktops, walls, etc. Perfect for commercial installations.

____________________________________________________________________________________________________
OA
https://vintageking.com/triad-orbit-arm-oa
Main photo
Needs Usage photos
Product Description for website:
The Orbit OA is a freestanding version of a single Orbit 2 type orbital boom arm. Extend and manuever heavy devices with exact placement only possible with this heavy duty ball joint. Use with IO-C and Synergy clamps to extend devices from Triad stands, or use with IO-W & IO-WSP to accurately position devices from walls or ceilings. Pairing with an IO-VM creates options for wall or floor mounting video monitors or televisions.
____________________________________________________________________________________________________
Usage photos
product description for website:

Retrofitting conventional mic stands and boom arms with IO-RA Quick-Change Couplers provides an instant upgrade in functionality. Live sound and recording professionals will easily recoup their investment in MICRO and IO technology by realizing instant savings from reduced set-up and tear-down times.

The IO-RA Quick-Change Coupler is comprised of two main parts:

The IO-H2 Hex Head with 5/8″-27 diameter thread for most mic clips and microphone accessories.

The IO-RA coupler body, which provides conventional mic stands and booms quick-change compatibility with all Triad-Orbit stand system components.

IO-RA also includes two 3/8″ adapters; one male and one female, as well as a tightening wrench.

____________________________________________________________________________________________________
IO-RA6
https://westlakepro.com/product/io-ra-6-io-retrofit-quick-change-coupler-aluminum-6-pack/
Main photo
Usage photo
Product Description for website:
IO-RA is now available in Six Packs. With its reduced packaging and cost, Triad-Orbit is giving studios, content creators and production companies a more cost-effective way to deploy multiples of the lighter and already affordable IO-RA, allowing you to quickly interchange booms and mics across your entire inventory of existing stands.
____________________________________________________________________________________________________
iOrbit
https://westlakepro.com/product/iorbit-universal-tablet-phone-holder-universal-tablet-phone-holder/
Main photo
Used photos

Video
https://www.youtube.com/watch?v=GEsqeE82Y3E
Product Description for website:

The modular IO mounting head allows iOrbit to instantly and effortlessly connect to the included IO-C clamp or any Triad-Orbit product.

iOrbit expands to fit phones and even larger tablets with a grip width of 2.55″ to 10.75″. It fits the 12.9-inch iPad Pro as well as many tablets or phones.

The iOrbit features a brass IO hex mounting head which allows it to instantly and effortlessly connect to the included IO-C clamp or any other Triad-Orbit IO-equipped product.

The stem can be positioned up and down the holder, putting the weight of the tablet or smartphone in the center, or shifting it to one side for nearly infinite viewing angles.

iOrbit utilizes the “tried-and-true” ball-swivel locking mechanism found in the Micro 2™ to allow for free positioning anywhere within 360° x 180°, its 3-axis.

____________________________________________________________________________________________________
IO-EXT2S
https://westlakepro.com/product/triad-orbit-io-ext2s-io-equipped-spinning-2-extension/
Main photo
IO-EXT2S is a 360 degree rotational IO connector that can be added to existing stationary IO-connections, allowing for precise rotational adjustments as needed.
Needs video
Product description for website:
IO-EXT2S is the perfect solution when alignment is critical. Pair the IO-EXT2S with IO-W wall mounts and IO-VM vesa mounts for wall mounted computer monitors, tv’s, or speakers.
____________________________________________________________________________________________________
IO-C
https://westlakepro.com/product/io-c-clamp-io-equipped-clamp/
Main photo
Needs usage photos

Video
https://youtu.be/bPhV-hyka3I
Product description for website:

IO-C / IO-Equipped Clamp

IO-C mounting clamps are purpose-built for attaching Triad-Orbit IO-Equipped adapt­ers, boom arms, tablet holders, and assorted accessories to stands, trusses, tabletops, and other parallel surfaces. Create unique solutions and multipurpose setups easily by adding an IO-C, OA, OA-M and/or Micro adapters.

____________________________________________________________________________________________________
O1-L
https://westlakepro.com/product/orbit-1-single-arm-orbital-boom/
Main photo
Needs use photos
Product Description for website:
ORBIT single-arm orbital booms utilize a stainless steel ball swivel mechanism to deliver an unparalleled range of motion (360° x 220°) that’s extremely smooth, quiet and stable. Orbit booms incorporate IO quick-change couplers for rapid hardware changes without the hassle and delay of threaded connections. Orbit O1-L booms have a larger counterweight than the OM Series booms (1Kilo vice .5Kilo) which increases stability when handling heavier large diaphragm microphones, lights, or cameras at distances up to 37.5″.  Orbit O1-L booms utilize industrial-grade clutches in lieu of knobs and thumbscrews to secure all points of adjustment on the shafts. The knurled metal clutch barrels are coated to provide a comfortable ergonomic grip that yields more torque. With no protruding parts, Orbit 1-L booms transport and store with total reliability.
____________________________________________________________________________________________________
OM
https://westlakepro.com/product/orbit-mini-single-arm-orbital-boom/
Main photo
Needs video
Product description for website:

ORBIT SERIES OM
SHORT SINGLE-ARM BOOM

The little brother of Orbit 1 and the companion boom arm for the Triad Mini Stand. Awesome in tight spaces and backline applications. Also great for vocals and acoustic instruments where an extended boom is unneeded.

____________________________________________________________________________________________________
T1c
https://westlakepro.com/product/triad-orbit-triad-1c-short-tripod-stand-with-casters/
Main photo
Use photos.
Triad 1 stand with industrial grade locking casters.
Product description for website:

TRIAD SERIES T1C / SHORT TRIPOD WITH CASTERS

Designed to be used where low-profile and small-footprint stands are needed. As with all Triad-Orbit stands, applications are virtually limitless depending on your need. Couple the T1 with other Triad-Orbit products for the following example applications:

  • drum mic placement (couple with Orbit booms, IO-Vector, IO-C, for kick, snare, tom, or hi hat use)
  • music stands (couple with IO-Desk for seated musicians)
  • tilt-back amp stand/mic combo (couple with an O1 boom and M2 or M3 to close mic a combo amp)
  • dual back-line amp micing (couple with O2 and M1 or M2 for micing 2 back line amps)
  • Low profile beauty light (couple with O1 boom)
  • B-roll camera (couple with Orbit boom, M2 and 1/4ADA)
____________________________________________________________________________________________________
TM
https://westlakepro.com/product/triad-mini-tripod-stand/
Main photo
Video
Usage photo
Product description for website:

TM is designed to be used where ultra-low-profile and small-footprint stands are needed. As with all Triad-Orbit stands, applications are virtually limitless depending on your need. Couple the TM with O2, O2X, IO-Vector, IO-C, M2, IO-RA, IO-VM for the following example applications:

  • Acoustic instruments (use O2 or O2x for stereo low profile mic technique)
  • B-roll video (use O2X,M2 and 1/4ADA for camera and lights)
  • 360 camera (couple with 1/4 or 3/8ADA)
  • Confidence monitor for live performance/karaoke use (couple with OA, IO-VM)
____________________________________________________________________________________________________
T1
https://westlakepro.com/product/triad-t1-short-tripod-stand/
Main photo
Usage photos

Video
https://www.youtube.com/watch?v=qFujfeuCBDc
Product Description for website:

Designed to be used where low-profile and small-footprint stands are needed. As with all Triad-Orbit stands, applications are virtually limitless depending on your need. Couple the T1 with other Triad-Orbit products for the following example applications:

  • drum mic placement (couple with Orbit booms, IO-Vector, IO-C, for kick, snare, tom, or hi hat use)
  • music stands (couple with IO-Desk for seated musicians)
  • tilt-back amp stand/mic combo (couple with an O1 boom and M2 or M3 to close mic a combo amp)
  • dual back-line amp micing (couple with O2 and M1 or M2 for micing 2 back line amps)
  • Low profile beauty light (couple with O1 boom)
  • B-roll camera (couple with Orbit boom, M2 and 1/4ADA)
____________________________________________________________________________________________________
T1OMM2 system
https://westlakepro.com/product/triad-orbit-stand-system-t1-om-m2/

Product Description for website:

The T1 Tripod Boom Stand makes it simple to get your mics in the perfect spot, and the Quick-Change Couplers make it effortless to swap out mics. Plus, all Triad-Orbit Tripod stands feature heavy, solid legs so you can place your best mics on the boom without fear.

The ORBIT Mini – The little brother of Orbit 1 and the companion boom arm for the Triad Mini Stand. Awesome in tight spaces and backline applications. Also great for vocals and acoustic instruments where an extended boom is unneeded.

The MICRO M2 orbital mic adapter features the exclusive Compass Point™ ball swivel housing that solidly secures microphones, cameras, and lights in position for precise directionality.

____________________________________________________________________________________________________
T2O1-LM2 system
https://westlakepro.com/product/t2-o1-l-m2-standard-tripod-stand-system-including-1-t2-1-o1-and-1-m2/
Product description for website:

The T2 Tripod Boom Stand system makes it simple to get your mics in the perfect spot, and the Quick-Change Couplers make it effortless to swap out mics. Plus, all Triad-Orbit Tripod stands feature heavy, solid legs so you can place your best mics on the boom without fear.

The O1-L Orbital Boom is—in a word—revolutionary. With its proprietary ball swivel and robust build quality, surgically precise microphone, light, camera, or device placement is now attainable in every  performance scenario, regardless of the venue.

The MICRO M2 orbital mic adapter features the exclusive Compass Point™ ball swivel housing that solidly secures microphones, cameras, and lights in position for precise directionality.

____________________________________________________________________________________________________
T3O1-LM2 system
https://westlakepro.com/product/triad-orbit-stand-system-t3-o1-l-m2/
Product description for website:

Triad Series T3 – Tall Tripod Stand

T3 utilizes a three-section shaft for specialized stage and studio applications and features an air suspension system to protect expensive lights, cameras, and microphones against accidental impact damage. The T3 is a great alternative for traditional photography C-Stands.

____________________________________________________________________________________________________
T3
https://westlakepro.com/product/triad-3-tall-tripod-stand/
Main photo
Usage photos
Product description for website:

Triad Series T3 – Tall Tripod Stand

T3 utilizes a three-section shaft for specialized stage and studio applications and features an air suspension system to protect expensive lights, cameras, and microphones against accidental impact damage. The T3 is a great alternative for traditional photography C-Stands.

____________________________________________________________________________________________________
T2
https://westlakepro.com/product/triad-t2-standard-tripod-stand/
Main photo
Product description for website:

TRIAD SERIES T2 / STANDARD TRIPOD

The new standard for professional stands. TRIAD Series T2 is the new standard for professional-grade stands with its proprietary articulating base.

____________________________________________________________________________________________________
T2c
https://vintageking.com/triad-orbit-t2c-stand-w-locking-casters
Main photo
Product Description for website:
Triad Series T2C is combination of a special, caster-ready, medium-height tripod stand stand and set of TC dual-locking, industrial-grade locking casters. The casters are easy to install and remove for versatile utility.
____________________________________________________________________________________________________
IO-FLX
https://westlakepro.com/product/triad-orbit-io-flx-io-equipped-flexible-extension/
Main photo
Video
Product description for website:
Triad Series T2C is combination of a special, caster-ready, medium-height tripod stand stand and set of TC dual-locking, industrial-grade locking casters. The casters are easy to install and remove for versatile utility.
____________________________________________________________________________________________________
IO-Vector
https://westlakepro.com/product/io-vector-io-equipped-utility-bar/
Main photo
Usage photos
Video
https://www.youtube.com/watch?v=M493Qj1Sduc

IO-VECTOR
STEREO UTILITY BAR

The new IO-Vector takes the traditional stereo bar to a new dimension–literally. IO-Vector provides four points of connectivity for 3-D positioning of creative, medical and industrial devices. IO-Vector is bundled with IO-R38 quick-change coupler. Integrating Micro adapters and IO-A telescoping boom arms greatly expands the capabilities of IO-Vector including innovative left / right stereo imaging, Decca trees and 3D video. Add Micro M2™ orbital adapters to an IO‑Vector to expand the positioning options for microphones and cameras to enhance your Triad‑Orbit stand system’s range of motion and positioning.

____________________________________________________________________________________________________
IO-S6
https://westlakepro.com/product/triad-orbit-io-s6-io-retrofit-avid-s6-console-adaptor/
Main photos
IO-S6 is an accessory specifically designed to add I/O connectivity to the rear of AVID S6 consoles, allowing the addition of monitors, microphones, or other devices when used with other Triad-Orbit products. IO-S6 is an accessory specifically designed to add I/O connectivity to the rear of AVID S6 consoles, allowing the addition of monitors, microphones, or other devices when used with other Triad-Orbit products.
Use photos
Product description for website:
IO-S6 opens creative options for your Avid S6 console. IO-S6 connects to the rear of the console on the mounting frame and provides IO (In/out)  connectivity to add your favorite accessories, such as: Speakers, cameras, microphones, laptops, sheet music. Pair with the following Triad-Orbit products; IO-A1A or IOA2A and M2 for camera mounting, IO-A2A and OM boom for microphones, IO-Desk for laptops, notes, sheet music. IO-S6 enhances your workflow by providing accessories quickly and easily with a simple click.
____________________________________________________________________________________________________
Starbird SB-1
https://westlakepro.com/product/starbird-sb1-boom-stand/
Please say “licensed and redesigned”
Product description for website:
HISTORY & EVOLUTION OF THE STARBIRD

Those versed in the golden age of audio recording know George Starbird’s legendary Model No.180 studio boom stand has earned a place alongside the most revered vintage analog microphones, consoles and outboard gear of the era. Starbird started Meletron Corporation in Los Angeles in 1939 to manufacture radio parts. He designed the Model 180 studio boom stand for large broadcast environments in the 1940s and recording studios soon discovered its unrivaled reach, range of motion and stability and adopted it as the large mic stand of choice. Meletron turned its focus to manufacturing pressure sensitive mechanical switches for the lucrative aeronautics, military and industrial markets in the early 1950s and ceased operations in 1970. Manley Laboratories, Inc., celebrated maker of professional studio and hifi audio equipment, purchased the tooling and trademark for the Model 180 in 1991 and produced an updated version of the Starbird in their California facility until 2010. Now in its third iteration, Starbird by Triad-Orbit (T-O SB-1) incorporates patented T-O innovation to impart new levels of performance, versatility and stability to the storied Model 180 platform. Most importantly, All Triad-Orbit Starbird stand base, boom swivel and clutch components retrofit to legacy Starbird stands.

____________________________________________________________________________________________________
O2
https://westlakepro.com/product/o2-dual-arm-orbital-boom/
New main picture
Usage photos
 
Video
https://www.youtube.com/watch?v=LtoziE3CD9g
Product description for website:
Orbit Series O2 orbital booms feature a unique dual-arm design – each arm equipped with the proprietary ORBIT ball swivel mechanism – making it one of the most versatile booms on the market. Applications across multiple disciplines are now a reality; today it is the ‘go-to’ stand for stereo or dual miking assignments such as grand pianos, snare drum (top & bottom), guitar and vocals, choirs, big bands, and orchestras – Tomorrow it is the center of a full A/V multimedia or Social Media solution holding lights, cameras, microphones. Orbit 2 booms do the work of two stands, freeing up resources when multiple devices are called for and space is limited.Dual boom arms are only part of the ORBIT 2 story. Anchoring ORBIT 2 is a novel center swivel that provides an additional 45° of left-right motion to the boom arms. The Compass Point ball swivel housing provides each O2 boom arm with precise, stable positioning whenever the arms are engaged. And IO Quick-Couplers terminate the end of every O2 arm, offering twice the versatility of conventional booms in a fraction of the time it takes for normal setups.
Boom Arms Range: 17-24 in.
Range of Motion: 360° x 220°
Weight: 7 lbs
____________________________________________________________________________________________________
IO-Desk
https://westlakepro.com/product/io-desk-io-equipped-desk/
New main photo
Use photos
Video
https://www.youtube.com/watch?v=k8d3eEbKKIY

 

Product description for website:

IO-Desk is a secure support platform for laptops and power supplies. IO-Desk features a sturdy 2 mm aluminum deck equipped with (180) 3/8-in. and (4) 5/8-in. mounting holes and corresponding device fasteners. IO-Desk includes the perforated aluminum mounting surface, (2) 5/8-in. locking fasteners, (2) 3/8-in. laptop fasteners, (2) 3/8-in. power supply fasteners, (1) IO-H and a music stand adapter plate.

IO‑Desk works with traditional 5/8 threads and includes a Triad‑Orbit IO‑H2 for quick-change operation. Once you’ve threaded the IO‑H2 into the base of the desk simply align the hex and press down. The quick-change coupler automatically locks in place. The IO‑H2 also includes a lock ring for proper alignment on non rotating stands.

IO‑Desk system includes the following components: (1) IO‑H2 stainless steel Hex Mounting Head, (4) 3/8 in. threaded Security Studs, (4) threaded Security Fasteners, (4) threaded Strap Buttons, (4) Security Straps and (1) Security Shelf with 5/8 in. bolts and lock washers.

IO‑Desk includes four threaded 3/8″ Security Studs and four silicone straps that can be used to secure your devices to the desk. Place your device as you intend to use it and position the studs to best secure the device. Place the silicone straps over the device and onto the studs with as much tension as you need.

____________________________________________________________________________________________________
Use photos
 
Product Description for website:
IO-String Swing™ – Quickly and securely hang your favorite instruments off of Triad-Orbit stands or wall mounts with the new IO-equipped yokes brought to you by Triad Orbit and String Swing.
IO-String Swing Options
Guitar/Bass (-G)
Mandolin (-M)
Violin (-V)
IO-String Swing Sizes
Short (TSS2)
Pair with IO-W or IO-WSP for wall mounting or small body acoustic or solid body electric instruments on stands* with IO-GC/IO-GCM.
Long (IO-SS1)
Designed for deeper body acoustic instruments when mounted on stands*, or when extra reach is needed such as mounting on walls with acoustic treatment.
Each IO-String Swing yoke comes with a threaded hex adaptor for use with all IO-equipped connections. Yokes can also be used without hex adapter by threading the yoke into a 1/4-20 hole found on our IO-GC and IO-GCM grip clamps.
*Triad-Orbit T2 and T3 stands are highly recommended due to their weight and low center of gravity. 
____________________________________________________________________________________________________
SM-1
Photos are good
Video for all parts and systems. (Important to explain the systems)
While priced separately, you will do well to put in the system photos.
Genelec wall mount system
JBL 705p wall mount system
JBL 708p wall mount system
705i and 708i wall mount system
705i and 708i ceiling mount system

705p ceiling mount system

708p ceiling mount system
Genelec ceiling mount system
Use photos
SM1 Product description:

The Triad-Orbit, Precision® AV Atmos Speaker Mount System offers many options for mounting onto walls, ceilings or Triad-Orbit® IO. This uniquely designed patent-pending speaker mounting system allows the installer to meet the critical demands of Dolby Atmos installations providing unparalleled flexibility in mounting and alignment options, saving time in installation and laser alignment. SM-1 system features multiple speaker mounting plates for different manufacturers, dual redundant locking mechanisms, and 15 degree locking positions in both tilt and pan axis. Optional mounting configurations are available to accommodate wall, ceiling, long drop ceiling, pipe and truss mounting.

System Components

  • SM-WM1 wall/ceiling mount houses the SM-SW1 swivel. The SM-SW1 slides into the SM-WM1 mount and secures by 4 hex screws. This allows the speaker to be attached to the swivel first and then sliding the assembly in the SM-WM1 mounting plate.
  • SM-SW1 swivel can accommodate the various speaker mounting plates or can connect directly to speakers that have a dual hole pattern (50mm-80mm). SW-1 has spring pins in 15 degree increments as well as secondary tension locks in both tilt and pan axis.

Speaker Brackets

  • SM-705B and SM-708B (JBL 705p/708p speakers) have five possible mounting points to allow for optimal positioning. Refer to the provided instructions for mounting options.

Mounting Plates

  • SM-7iP (non-powered JBL 705/708 installer series) speaker plate has four (4) 50mm holes and four (4) 80mm slots for ease of mounting. This allows both vertical and horizontal orientation when attaching to the SM-SW1 swivel.
  • SM-GP (Genelec) speaker plate has four (4) holes spaced 127mm X 70mm to accommodate Genelec One series speakers and (4) holes spaced 108mm X 51mm for smaller Genelec speakers. Note: Many Genelec and other speakers may connect directly to the SM-SW1 using the 50mm-80mm slotted holes.
  • SM-PM1 pipe mounting plate is intended for use with standard 3/4” NTS pipe thread for long drop hanging or extending off of walls.
  • SM-IOM1 is designed to be used with Triad-Orbit IO-connected components. Use with Triad-Orbit IO-GC grip clamp for truss mounting configurations.
  • This list will be updated as new speaker manufacturer plates are approved for use. Contact Triad-Orbit if you do not see an intended use speaker on this list.
____________________________________________________________________________________________________
M2
https://westlakepro.com/product/triad-orbit-m2-short-stem-adaptor/
Main Photo

Use photos
  
Product description for website:

MICRO orbital adapters are miniature versions of ORBIT orbital booms, exhibiting the same enhanced range of motion, thanks to the unique ball swivel mechanism. Using MICRO adapters in conjunction with ORBIT booms, clamps, or wall/ceiling mounts exponentially increases the accuracy and versatility of any microphone, camera, or lighting stand. The MICRO M2 orbital adapter features unprecedented range of motion purpose-built for applications where precision placement of microphones, cameras, or other devices is required. The exclusive Compass Point ball swivel housing solidly secures attached devices in any mounting position.

All MICRO orbital adapters are IO-equipped, giving them quick-change compatibility with all Triad-Orbit IO (input/output) capable products.  Conventional stands can benefit from TRIAD-ORBIT quick-change innovation with the addition of MICRO and IO aftermarket components. Retrofitting conventional stands and boom arms with MICRO(r) and IO(r) aftermarket components provides an instant upgrade in functionality. Live sound, studio recording, location sound, and videography professionals will easily recoup their investment in MICRO and IO technology by realizing instant savings from reduced set-up and tear-down times. MICRO and IO retrofittable aftermarket components are equipped with traditional 5/8-inch threads for universal compatibility.

____________________________________________________________________________________________________
M2-R
https://westlakepro.com/product/triad-tc-casters-triad-casters-set-of-3/
Main photo
Usage Photos
Product Description for website:

MICRO Orbital Adapters are miniature versions of ORBIT Orbital Booms, exhibiting the same enhanced range of motion, thanks to the unique ball swivel mechanism. Using MICRO Adapters in conjunction with ORBIT Booms exponentially increases the accuracy and versatility of any stand.

Conventional stands can benefit from TRIAD-ORBIT quick-change innovation with the addition of MICRO and IO Retrofit Components. Retrofitting conventional stands and boom arms with MICRO-R and IO-R aftermarket components provides an instant upgrade in functionality.

____________________________________________________________________________________________________

M3

Triad-Orbit M3 Long Stem Adaptor

Main
secondary photo.
Usage photos
Video
https://www.youtube.com/watch?v=89DDcc5tfzA
Product description for website:
Micro 3™- M3 orbital adapter provides flexibility to support a microphone, camera, or lighting device with tremendous hold at any angle. M3 incorporates a textured stainless-steel ball, a 4-point compass post housing, and a 1.5-inch stem for extra reach and stand-off for ease with shock mount rotation and basket positioning. A deeper crenel on the compass point housing allows added flexibility beyond the 90˚ stops of the other 3 crenels.
____________________________________________________________________________________________________
M3-R
Not Listed
M3 Represents the best of M1 and M2, using the M1 longer stem for reach and stand-off for ease with shock mount rotation and basket positioning along with M2’s 4 point compass post housing with a deeper crenel to go past 90º and the new upgraded textured stainless steel ball for tremendous hold.
Usage photos
Product Description for website:

Micro 3™- M3-R

Micro Orbital adapters are miniature versions of Orbit orbital booms, exhibiting the same enhanced range of motion, thanks to the unique ball swivel mechanism. Mounting photo, video or action cameras on Micro adapters exponentially increases the precision and versatility of any support system.

Conventional stands can benefit from TRIAD-ORBIT quick-change innovation with the addition of MICRO and IO Retrofit Components. Retrofitting conventional stands and boom arms with MICRO-R and IO-R aftermarket components provides an instant upgrade in functionality.

____________________________________________________________________________________________________
IO-GC
IO-Equipped Grip Clamp is a patented, powerful, versatile, articulating jaw clamp fitted with our IO receiver,which will securely lock down on any 2” truss or rail.
https://westlakepro.com/product/triad-orbit-synergy-series-grip-clamp-io-equipped-savior-clamp/
Video
Use photos
 
Product description for website:
Synergy Series™ IO-Equipped Grip Clamp is a patented, powerful, versatile, articulating jaw clamp fitted with our IO receiver,which will securely lock down on any 2” truss or rail, creating a stable base for all T-O Orbit booms, IO accessories and whatever else needs a solid anchoring platform. It has unique articulating jaws that grabs firmly onto odd shaped objects and allows for multiple applications ensuring a strong grip every time and accommodates all T-O accessories and optional 1/4”-20 thread seat for A/V devices.
____________________________________________________________________________________________________
IO-GCM
https://westlakepro.com/product/triad-orbit-synergy-series-mini-grip-clamp-io-equipped-savior-clamp-mini/
Use photo
Product description for website:
Synergy Series™ I/O-Equipped Mini Grip Clamp is Capable of exerting very strong clamping force, IO-GCM has jaws that open up to 1.18″ to hold gear weighing up to 66 lb. The jaws themselves were designed with peaks and valleys to accommodate as many odd shapes as possible whether they’re round, square diamond or irregularly shaped. The clamp has one 1/4″-20 female threaded hole to allow for mounting of additional equipment.
____________________________________________________________________________________________________
IO-SPKR
main image
IO quick change speaker plate
Use photos
Product description for website:
IO-SPKR is IO-Quick Change Coupler head and plate that fits two hole speakers with span of 50mm-100mm.
They can be used with IO-W, IO-WSP wall plates, IO-GC or IO-GCM clamps and on Triad stands.
Use OA ball joint or IO-LCK as the speaker swivel.
T3 stands are highly recommended due to their weight and low center of gravity.
____________________________________________________________________________________________________
IO-H3
https://westlakepro.com/product/io-h3-io-3-8-quick-change-coupler-head-brass/
Needs now photo (no brass)
Product description for website:

IO-H quick-change mounting heads securely connect microphones, booms and miscellaneous accessories to TRIAD-ORBIT advanced stand system components. The IO-H3 quick-change mounting head utilizes a 3/8-inch male mounting thread for compatibility with European and esoteric mics, as well as professional Photo and video cameras.

The exclusive IO quick-change coupler is standard equipment on all TRIAD stands and ORBIT booms. IO effortlessly captures booms and mics with ease and assurance. On-the-fly hardware swaps are now a reality, replacing the tedious task of threading booms and mic clips on and off. Rapid hardware and mic changes between recording sessions and live sets are a snap, thanks to the integrated IO quick-change platform.

Conventional stands can benefit from TRIAD-ORBIT quick-change innovation with the addition of MICRO and IO aftermarket components. Retrofitting conventional stands and boom arms with MICRO-R and IO-R aftermarket components provides an instant upgrade in functionality. Live sound and recording professionals will easily recoup their investment in MICRO and IO technology by realizing instant savings from reduced set-up and tear-down times.

____________________________________________________________________________________________________
IO-H4
https://westlakepro.com/product/io-h4-io-1-4-20-quick-change-coupler-head-brass/
All brass is discontinued
Needs new photo

Product Description on website:

IO-H quick-change mounting heads securely connect microphones, booms and miscellaneous accessories to TRIAD-ORBIT advanced stand system components. IO-H4 has 1/4″-20 male mounting thread and a brass hex especially for consumer and prosumer photo and video cameras. The stainless steel hex operates smoothly and reliably where constant swap-outs are common.

The exclusive IO quick-change coupler is standard equipment on all TRIAD stands and ORBIT booms. IO effortlessly captures booms and mics with ease and assurance. On-the-fly hardware swaps are now a reality, replacing the tedious task of threading booms and mic clips on and off. Rapid hardware and mic changes between recording sessions and live sets are a snap, thanks to the integrated IO quick-change platform.

Conventional stands can benefit from TRIAD-ORBIT quick-change innovation with the addition of MICRO and IO aftermarket components. Retrofitting conventional stands and boom arms with

MICRO-R and IO-R aftermarket components provides an instant upgrade in functionality. Live sound and recording professionals will easily recoup their investment in MICRO and IO technology by realizing instant savings from reduced set-up and tear-down times.

 

____________________________________________________________________________________________________

IO-H5

Triad-Orbit IO-H5 IO Lighting Quick-Change Coupler Head, Brass

Old version photo  (no brass)
Main photo
Product Description for website:

IO-H quick-change mounting heads securely connect microphones, booms and miscellaneous accessories to TRIAD-ORBIT advanced stand system components. IO-H5 is purpose-built for professional lighting and photography. It has both a 1/4″-20 male mounting thread and a standard 5/8″ diameter stud for most photographic and video lighting fixtures IO-H5 is made with a notched stainless steel hex for added weight handling capacity.

The exclusive IO quick-change coupler is standard equipment on all TRIAD stands and ORBIT booms. IO effortlessly captures booms and mics with ease and assurance. On-the-fly hardware swaps are now a reality, replacing the tedious task of threading booms and mic clips on and off. Rapid hardware and mic changes between recording sessions and live sets are a snap, thanks to the integrated IO quick-change platform.

Conventional stands can benefit from TRIAD-ORBIT quick-change innovation with the addition of MICRO and IO aftermarket components. Retrofitting conventional stands and boom arms with MICRO-R and IO-R aftermarket components provides an instant upgrade in functionality. Live sound and recording professionals will easily recoup their investment in MICRO and IO technology by realizing instant savings from reduced set-up and tear-down times.

____________________________________________________________________________________________________
IO-H6
https://westlakepro.com/product/io-h6-io-lighting-quick-change-coupler-head-steel/
Product Description for website:

IO-H quick-change mounting heads securely connect microphones, booms and miscellaneous accessories to TRIAD-ORBIT advanced stand system components. IO-H6 is purpose-built for professional lighting and photography. IO-H6 is an aluminum lighting baby stud with a stainless steel hex mounting head for compatibility with IO and IO-R couplers.

The exclusive IO quick-change coupler is standard equipment on all TRIAD stands and ORBIT booms. IO effortlessly captures booms and mics with ease and assurance. On-the-fly hardware swaps are now a reality, replacing the tedious task of threading booms and mic clips on and off. Rapid hardware and mic changes between recording sessions and live sets are a snap, thanks to the integrated IO quick-change platform.

Conventional stands can benefit from TRIAD-ORBIT quick-change innovation with the addition of MICRO and IO aftermarket components. Retrofitting conventional stands and boom arms with MICRO-R and IO-R aftermarket components provides an instant upgrade in functionality. Live sound and recording professionals will easily recoup their investment in MICRO and IO technology by realizing instant savings from reduced set-up and tear-down times.

____________________________________________________________________________________________________
IO-G
https://westlakepro.com/product/io-g-io-gopro-quick-change-coupler-head-brass/
Replace main photo (no brass)
Usage photo
Product Description for website:

IO-H quick-change mounting heads securely connect microphones, booms and miscellaneous accessories to TRIAD-ORBIT advanced stand system components. IO-H6 is purpose-built for professional lighting and photography. IO-H6 is an aluminum lighting baby stud with a stainless steel hex mounting head for compatibility with IO and IO-R couplers.

The exclusive IO quick-change coupler is standard equipment on all TRIAD stands and ORBIT booms. IO effortlessly captures booms and mics with ease and assurance. On-the-fly hardware swaps are now a reality, replacing the tedious task of threading booms and mic clips on and off. Rapid hardware and mic changes between recording sessions and live sets are a snap, thanks to the integrated IO quick-change platform.

Conventional stands can benefit from TRIAD-ORBIT quick-change innovation with the addition of MICRO and IO aftermarket components. Retrofitting conventional stands and boom arms with MICRO-R and IO-R aftermarket components provides an instant upgrade in functionality. Live sound and recording professionals will easily recoup their investment in MICRO and IO technology by realizing instant savings from reduced set-up and tear-down times.

____________________________________________________________________________________________________
O2x
https://westlakepro.com/product/o2x-dual-arm-orbital-boom-with-four-quick-change-arms/
Main photo
Orbit dual orbital booms feature a unique dual-arm design – each arm equipped with the proprietary ORBIT ball swivel mechanism – making it one of the most versatile booms on the market. Orbit Series O2X dual orbital boom system extends the utility of the original O2 dual orbital boom with the addition of detachable arms via IO Quick‑Change Couplers. Four IO‑A telescopic boom arms are included (2 short arms, 2 long arms), allowing users to custom-configure a dual boom to adapt to a multitude of tasks in seconds. Applications across multiple disciplines are now a reality; today it is the ‘go-to’ stand for stereo or dual miking assignments such as grand pianos, snare drum (top & bottom), guitar and vocals, choirs, big bands, and orchestras – Tomorrow it is the center of a full A/V multimedia or Social Media solution holding lights, cameras, microphones. Orbit O2X booms do the work of two stands, freeing up resources when multiple devices are called for and space is limited.Dual boom arms are only part of the ORBIT O2 story. Anchoring ORBIT 2 is a novel center swivel that provides an additional 45° of left-right motion to the boom arms. The Compass Point ball swivel housing provides each O2 boom arm with precise, stable positioning whenever the arms are engaged. And IO Quick-Couplers terminate the end of every O2 arm, offering twice the versatility of conventional booms in a fraction of the time it takes for normal setups.
____________________________________________________________________________________________________
IO-RL
https://westlakepro.com/product/io-rl-quick-change-coupler-for-lighting-stands/
Main photo
Use photos
Product description for website:

IO-RL Lighting Stud Quick-Change Couplers are designed to connect professional lights to lighting stands and mounting hardware. IO‑RL retrofits to conventional C-stands and lighting mounts and provides instant IO quick-change compatibility. Equip all your lights and modifiers with Triad‑Orbit IO‑H5 hex mounting heads for instant quick-change mounting to IO‑RL. IO‑RL pays for itself with time saved during set changes.

The IO-RL Quick-Change Coupler is comprised of two main parts:

The IO-H5 Hex Head with both a 1/4-20 male mounting thread and a standard 5/8″ diameter stud for most photographic and video lighting fixtures.

The IO-RL coupler body, which provides lighting stands instant, quick-change compatibility with all Triad-Orbit stand system components.

IO-RL also includes two sets of set screws, one long set and one short and an adjustment wrench.

____________________________________________________________________________________________________
IO-R38
https://westlakepro.com/product/io-r38-io-retrofit-quick-change-coupler-3-8-male-to-io-female/
New main photo
Usage photos
Product Description for website:

IO-R38 is an aluminum IO-R quick-change coupler equipped with a 3/8-inch threaded male mounting stud. IO-R38 is purpose-built to add IO mounting options to IO-Vector utility bars, IO-Desk and IO-C clamps.

The IO-R38 Quick-Change Coupler is comprised of two main parts:

The IO-H2 Hex Head with 5/8″-27 diameter thread for most mic clips and microphone accessories.

The IO-R38 coupler body, which provides Triad-Orbit quick-change compatibility to anything equipped with a 3/8-16 female thread.

IO-RA also includes a 3/8-16 male to 5/8-27 female adapter, as well as two 3/8-16 female to female couplers.

____________________________________________________________________________________________________
AV pack
https://westlakepro.com/product/av-pack-a-v-accessory-pack-including-io-h1-io-h2-io-h3-io-h4-io-h6-ltada-gpada-and-acc-pch/
Usage photos
Product description for website:
AV Pack™- Combines 7 important Triad-Orbit IO-H™ accessories into one package. Has all the essentials to connect microphones, GoPro, DSLR cameras, video cameras, LED lights, flashes and full sized photography grip gear to your Triad stands, booms or IO equipped devices. Plus, all of these items fit into the included accessory storage pouch. Included items: 2 ea IO-H2, IO-H3, IO-H4, IO-H6, LTADA, and GPADA.
____________________________________________________________________________________________________
IO-W
https://westlakepro.com/product/io-w-wallplate-desktop-mount-io-equipped-wallplate/
Main photo
Usage photos
Product Description for website:

IO-W / IO Equipped Wall Plate

IO-W Wallplate / Desktop Mount with IO Quick-Change Coupler.
IO-W Wallplate provides a stable platform for mounting Triad‑Orbit IO‑equipped microphone adapters, boom arms, tablet holders and assorted accessories to flat surfaces including walls, ceilings and desktops.

  • Footprint Width: 4.72 in.
  • Hole Spacing: 3.14 in. OC
  • Height: 2.76 in.

NOTE: Screws are not included with the IO-W, but we recommend using either #14 wood screws and/or 1/4-20 machine screws with a countersunk head. Length should be determined by the mounting surface material and anticipated use. If unsure of properly wall or ceiling mounting the IO-W, please refer to a qualified contractor to ensure mounting method and hardware is appropriate for the desired use and load. Only insert hex adapters that are steel and have a safety notch into a ceiling mounted IO-W.

____________________________________________________________________________________________________
IO-WSP
https://westlakepro.com/product/triad-orbit-io-wall-stud-plate-io-equipped-wall-stud-plate/
Main photo
Video
Usage photo
Product description for website:

IO-WSP serves two functions at one time, acting as a wall or ceiling mount similar to the IO-W, and allowing 360 degree rotational axis, similar to the EXT2S.  By combining these functions in one product, monitors, speakers and other wall mounted devices can be mounted closer to the wall than the IO-W/EXT2S combination. Stud screws included. Please consult a contractor if you are not comfortable with locating studs to ensure proper installation for weight bearing.

Max load 13.6kg, 30lbs.

____________________________________________________________________________________________________
IO-SC
Discontinued
____________________________________________________________________________________________________
IO-GC
Video URL:
https://youtu.be/7UTPN3gxwVA
Usage photos:
Product description for website:
Synergy Series™ IO-Equipped Grip Clamp is a patented, powerful, versatile, articulating jaw clamp fitted with our IO receiver,which will securely lock down on any 2” truss or rail, creating a stable base for all T-O Orbit booms, IO accessories and whatever else needs a solid anchoring platform. It has unique articulating jaws that grabs firmly onto odd shaped objects and allows for multiple applications ensuring a strong grip every time and accommodates all T-O accessories and optional 1/4”-20 thread seat for A/V devices.
____________________________________________________________________________________________________
O2XY
https://westlakepro.com/product/triad-orbit-orbit-2xy-dual-arm-orbital-boom-yoke/
Main photo
Usage photos
Product description for website:
Orbit dual orbital booms feature a unique dual-arm design – each arm equipped with the proprietary ORBIT ball swivel mechanism – making it one of the most versatile booms on the market. Orbit Series O2X dual orbital boom system extends the utility of the original O2 dual orbital boom with the addition of detachable arms via IO Quick‑Change Couplers. Four IO‑A telescopic boom arms are included (2 short arms, 2 long arms), allowing users to custom-configure a dual boom to adapt to a multitude of tasks in seconds. Applications across multiple disciplines are now a reality; today it is the ‘go-to’ stand for stereo or dual miking assignments such as grand pianos, snare drum (top & bottom), guitar and vocals, choirs, big bands, and orchestras – Tomorrow it is the center of a full A/V multimedia or Social Media solution holding lights, cameras, microphones. Orbit O2X booms do the work of two stands, freeing up resources when multiple devices are called for and space is limited.Dual boom arms are only part of the ORBIT O2 story. Anchoring ORBIT 2 is a novel center swivel that provides an additional 45° of left-right motion to the boom arms. The Compass Point ball swivel housing provides each O2 boom arm with precise, stable positioning whenever the arms are engaged. And IO Quick-Couplers terminate the end of every O2 arm, offering twice the versatility of conventional booms in a fraction of the time it takes for normal setups.
____________________________________________________________________________________________________
Micro Level
https://westlakepro.com/product/micro-level-micro-level/
Main photo
Use photos
Product Description for website:
Orbit dual orbital booms feature a unique dual-arm design – each arm equipped with the proprietary ORBIT ball swivel mechanism – making it one of the most versatile booms on the market. Orbit Series O2X dual orbital boom system extends the utility of the original O2 dual orbital boom with the addition of detachable arms via IO Quick‑Change Couplers. Four IO‑A telescopic boom arms are included (2 short arms, 2 long arms), allowing users to custom-configure a dual boom to adapt to a multitude of tasks in seconds. Applications across multiple disciplines are now a reality; today it is the ‘go-to’ stand for stereo or dual miking assignments such as grand pianos, snare drum (top & bottom), guitar and vocals, choirs, big bands, and orchestras – Tomorrow it is the center of a full A/V multimedia or Social Media solution holding lights, cameras, microphones. Orbit O2X booms do the work of two stands, freeing up resources when multiple devices are called for and space is limited.Dual boom arms are only part of the ORBIT O2 story. Anchoring ORBIT 2 is a novel center swivel that provides an additional 45° of left-right motion to the boom arms. The Compass Point ball swivel housing provides each O2 boom arm with precise, stable positioning whenever the arms are engaged. And IO Quick-Couplers terminate the end of every O2 arm, offering twice the versatility of conventional booms in a fraction of the time it takes for normal setups.
____________________________________________________________________________________________________
IO-GCM
Model number need to be in the title.
Use case pictures:
Product Description for website:
Synergy Series™ I/O-Equipped Mini Grip Clamp is Capable of exerting very strong clamping force, IO-GCM has jaws that open up to 1.18″ to hold gear weighing up to 66 lb. The jaws themselves were designed with peaks and valleys to accommodate as many odd shapes as possible whether they’re round, square diamond or irregularly shaped. The clamp has one 1/4″-20 female threaded hole to allow for mounting of additional equipment.
____________________________________________________________________________________________________
Cable control CCM
https://westlakepro.com/product/cc-medium-cablecontrol-2-pack-medium/
Needs new main photos
   
Product Description for website:

Cable Control Medium (2 pcs)

Cable Control comes in three sizes and one kit configuration— CCS Small: 3/4 in. (19 mm) diameter wrap for boom arms and the top tubes of microphone and AV support Stands (Triad TM, T1, T2, T3, T3C), as well as lightweight lighting stands. CCM Medium: 1-1/4 in. (32 mm) diameter cable wrap for the bottom tube of conventional two piece microphone stands and middle tubes on T3 and C-Stands. CCL Large: 1-1/2 in. (38 mm) diameter cable wrap for the bottom tube of heavy-duty three-piece microphone stands, on T3 and C-Stands

The overlapping edge of Cable Control tubes insure easy installation, secure retention and fluid movement of cables in the wrap.

Cable Control is 5″ in length and comes in three different diameters and four kit configurations. (See above)

Cable Control is made of semi-rigid 10mm PET braid and is lightweight, quiet and flexible, and doesn’t require any additional fasteners (velcro, tape, etc.).

____________________________________________________________________________________________________
Cable Control CCS
https://westlakepro.com/product/cc-small-cablecontrol-2-pack-small/
New main photo
Product Description for website:

Cable Control Small (2 pcs)
Cable Control comes in three sizes and one kit configuration— CCS Small: 3/4 in. (19 mm) diameter wrap for boom arms and the top tubes of microphone and AV support Stands (Triad TM, T1, T2, T3, T3C), as well as lightweight lighting stands. CCM Medium: 1-1/4 in. (32 mm) diameter cable wrap for the bottom tube of conventional two piece microphone stands and middle tubes on T3 and C-Stands. CCL Large: 1-1/2 in. (38 mm) diameter cable wrap for the bottom tube of heavy-duty three-piece microphone stands, on T3 and C-Stands

The overlapping edge of Cable Control tubes insure easy installation, secure retention and fluid movement of cables in the wrap.

Cable Control is 5″ in length and comes in three different diameters and four kit configurations. (See above)

Cable Control is made of semi-rigid 10mm PET braid and is lightweight, quiet and flexible, and doesn’t require any additional fasteners (velcro, tape, etc.).

____________________________________________________________________________________________________
CCL
https://westlakepro.com/product/cc-large-cablecontrol-2-pack-large/
Main photo

Product Description for website:

Cable Control Large (2 pcs)

Cable Control comes in three sizes and one kit configuration— CCS Small: 3/4 in. (19 mm) diameter wrap for boom arms and the top tubes of microphone and AV support Stands (Triad TM, T1, T2, T3, T3C), as well as lightweight lighting stands. CCM Medium: 1-1/4 in. (32 mm) diameter cable wrap for the bottom tube of conventional two piece microphone stands and middle tubes on T3 and C-Stands. CCL Large: 1-1/2 in. (38 mm) diameter cable wrap for the bottom tube of heavy-duty three-piece microphone stands, on T3 and C-Stands

The overlapping edge of Cable Control tubes insure easy installation, secure retention and fluid movement of cables in the wrap.

Cable Control is 5″ in length and comes in three different diameters and four kit configurations. (See above)

Cable Control is made of semi-rigid 10mm PET braid and is lightweight, quiet and flexible, and doesn’t require any additional fasteners (velcro, tape, etc.).

____________________________________________________________________________________________________

Cable Control CCK kit

Main photo
https://westlakepro.com/product/cc-kit-cablecontrol-kit-assorted/
Video for all Cable Control
Usage photos for all Cable control (CCS, CCM, CCK)
Product Description for website:

Cable Control Kit (2 Small / 1 Medium / 1 Large)

Cable Control comes in three sizes and one kit configuration— CCS Small: 3/4 in. (19 mm) diameter wrap for boom arms and the top tubes of microphone and AV support Stands (Triad TM, T1, T2, T3, T3C), as well as lightweight lighting stands. CCM Medium: 1-1/4 in. (32 mm) diameter cable wrap for the bottom tube of conventional two piece microphone stands and middle tubes on T3 and C-Stands. CCL Large: 1-1/2 in. (38 mm) diameter cable wrap for the bottom tube of heavy-duty three-piece microphone stands, on T3 and C-Stands

The overlapping edge of Cable Control tubes insure easy installation, secure retention and fluid movement of cables in the wrap.

Cable Control is 5″ in length and comes in three different diameters and four kit configurations. (See above)

Cable Control is made of semi-rigid 10mm PET braid and is lightweight, quiet and flexible, and doesn’t require any additional fasteners (velcro, tape, etc.).

____________________________________________________________________________________________________
IO-LCK
https://westlakepro.com/product/triad-orbit-io-lock-io-equipped-locking-swivel/
Main photo
Usage photos
Product Description for website:
IO-LCK is a rigid locking joint using a Hirth joint connection for ultimate hold. Use IO-LCK to support loads that would be excessive for our ball joints, such as monitors, tv’s or speakers. IO-LCK has a 360 degree rotational IO (in/out) receiver to allow for precise positioning. Combine IO-LCK with an IO-W mount or IO-WSP wall stud plate for secure wall mounting options.
____________________________________________________________________________________________________
TSB
https://westlakepro.com/product/triad-orbit-triad-shuttle-bag-triad-shuttle-bag/
Photos
Video
Product Description for website:
TSB
The Triad Shuttle Bag keeps two TRIAD-ORBIT stand systems safe and sound, to and from the gig with plenty of extra room for miscellaneous accessories. The Triad Shuttle Bag is a robustly constructed dual tier bag that allows the user to load and unload the bag with ease.

Features

  • Hard framed side walls
  • Super strong, smooth rolling wheels
  • Velcro hold downs
  • Dual handles for easy loading
  • 4 inner sidewall pocket
  • Large lid pocket
  • 2 accessory bags inside the lid pocket
____________________________________________________________________________________________________
TGB-2 has been redesigned completely
https://westlakepro.com/product/t-o-go-2-t-o-go-standard-carrier-bag/
Main photos
Open photos
Video
https://www.youtube.com/watch?v=EMR_AfCb7_c
Product Description for website:
TGB-2 Standard Carrier Bag
 
Now performers have a proper ‘Grab and Go’ carrier for their stand systems of choice. TGB-2 keeps two TRIAD-ORBIT stand system safe and sound, to and from the gig with plenty of extra room for mics, cables and miscellaneous accessories.
____________________________________________________________________________________________________
GB-3 Grav bags
https://westlakepro.com/product/gb-3-grav-bags-grav-bags-ballast-bags/
Main photo
Usage photos
Product Description for website:
GB-3 Grav Bags™ Ballast Bags
 
TRIAD-ORBIT Grav Bags are unique weighted ‘shot bags’ that can be used individually (3.3 lbs) as ‘booties’ on leg ends or combined (10 lbs) as center weight to stabilize mic stands in heavy traffic areas or precarious positions.
____________________________________________________________________________________________________
TC Casters
https://westlakepro.com/product/triad-tc-casters-triad-casters-set-of-3/
Main photo

Product Description for website:

TRIAD SERIES TC™ CASTERS

Triad TC™ Casters are industrial grade dual-locking studio casters. Available as a set of three and compatible with all current T1, T2 and T3 stands.

IF YOU HAVE QUESTIONS ABOUT THIS PART PLEASE CONTACT OUR WARRANTY SUPPORT TEAM AT 1-888-846-8776 OR SEND US AN EMAIL VIA OUR CONTACT US PAGE.

____________________________________________________________________________________________________
IO-VM
https://westlakepro.com/product/io-vm-io-equipped-vesa-mount/
Main photo

Use photos

Video
https://www.youtube.com/watch?v=1D0HQl9QRxw
Product Description for website:

IO-VM
VIDEO DISPLAY MOUNT

IO-VM is a MIS Class D VESA mount optimized for securing, supporting and positioning 12″ to 32″ video displays. The IO-VM mount works hand-in-hand with Triad-Orbit’s innovative OA orbital arm. Pair IO-VM with Triad T1c or T3C stands, IO-C clamps or IO-W wallplates for new support solutions in any location or application. Mounting and stowing IO-VM-equipped displays is effortless, thanks to the IO quick-change coupler.

  • Hole Pattern: 100mm x 100mm  & 75mm x 75mm
  • Weight limit: ≤30.8 lbs / ≤14 kg
  • Use with OA, IO-C clamp, IO-W Wallplate, T3, or T3C Stand.

The VESA Mount secures to displays with 100 x 100mm or 75 x 75mm hole spacing.

____________________________________________________________________________________________________
SB1-BB
https://westlakepro.com/product/triad-orbit-sb-1-ballast-bag-starbird-sb-1-ballast-bag/
More photos
Product Description for website:
Hanging heavy loads or devices from the Starbird SB-1 with it’s long wingspan extended may call for more weight than it’s 10 lb counterweight can balance. For those times, the SB1-BB adds another 6 lbs to the counterweight. SB1-BB is easy to install, just remove the cover from the back of the counterweight and slide the ballast bag in. Once the ballast bag is installed, it is recommended to check the counterweight bike lock and adjust the lock as necessary to insure the counterweight does not move with the added weight.
____________________________________________________________________________________________________
SM-SW1 Speaker Mount Swivel
USE. THIS DESCRIPTION FOR ALL SM1 products
Product Description for website:

The Triad-Orbit, Precision® AV Atmos Speaker Mount System offers many options for mounting onto walls, ceilings or Triad-Orbit® IO. This uniquely designed patent-pending speaker mounting system allows the installer to meet the critical demands of Dolby Atmos installations providing unparalleled flexibility in mounting and alignment options, saving time in installation and laser alignment. SM-1 system features multiple speaker mounting plates for different manufacturers, dual redundant locking mechanisms, and 15 degree locking positions in both tilt and pan axis. Optional mounting configurations are available to accommodate wall, ceiling, long drop ceiling, pipe and truss mounting.

System Components

  • SM-WM1 wall/ceiling mount houses the SM-SW1 swivel. The SM-SW1 slides into the SM-WM1 mount and secures by 4 hex screws. This allows the speaker to be attached to the swivel first and then sliding the assembly in the SM-WM1 mounting plate.
  • SM-SW1 swivel can accommodate the various speaker mounting plates or can connect directly to speakers that have a dual hole pattern (50mm-80mm). SW-1 has spring pins in 15 degree increments as well as secondary tension locks in both tilt and pan axis.

Speaker Brackets

  • SM-705B and SM-708B (JBL 705p/708p speakers) have five possible mounting points to allow for optimal positioning. Refer to the provided instructions for mounting options.

Mounting Plates

  • SM-7iP (non-powered JBL 705/708 installer series) speaker plate has four (4) 50mm holes and four (4) 80mm slots for ease of mounting. This allows both vertical and horizontal orientation when attaching to the SM-SW1 swivel.
  • SM-GP (Genelec) speaker plate has four (4) holes spaced 127mm X 70mm to accommodate Genelec One series speakers and (4) holes spaced 108mm X 51mm for smaller Genelec speakers. Note: Many Genelec and other speakers may connect directly to the SM-SW1 using the 50mm-80mm slotted holes.
  • SM-PM1 pipe mounting plate is intended for use with standard 3/4” NTS pipe thread for long drop hanging or extending off of walls.
  • SM-IOM1 is designed to be used with Triad-Orbit IO-connected components. Use with Triad-Orbit IO-GC grip clamp for truss mounting configurations.
  • This list will be updated as new speaker manufacturer plates are approved for use. Contact Triad-Orbit if you do not see an intended use speaker on this list.